<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema  http://www.spase-group.org/data/schema/spase-2_2_2.xsd'">
    <Version>2.2.2</Version>
    <NumericalData>
        <ResourceID>spase://VMO/NumericalData/Cluster-Rumba/WBD/PrimeParameter/PT0.02S</ResourceID>
        <ResourceHeader>
            <ResourceName>Cluster II Rumba Wide Band Data (WBD) Prime Parameters</ResourceName>
            <AlternateName>Cluster II WBD data</AlternateName>
            <ReleaseDate>2011-02-04T15:51:45Z</ReleaseDate>
            <Description>The WBD (Wide Band Data) investigation is designed to provide high-resolution frequency/time spectra of plasma waves in the Earth's magnetosphere. These data files contain information on the band width, resolution, antenna angles, offsets, magnetic and electric field information.    For more details of the Cluster mission, the spacecraft, and its instruments, see the report ``Cluster: mission, payload and supporting activities,'' March 1993, ESA SP-1159, and the included article ``The Wideband Plasma Wave Investigation,'' by D. A. Gurnett et al., from which this information was obtained.</Description>
            <Acknowledgement>NASA; Prof. Donald A. Gurnett</Acknowledgement>
            <Contact>
                <PersonID>spase://SMWG/Person/Donald.A.Gurnett</PersonID>
                <Role>PrincipalInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Les.J.C.Woolliscroft</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Robert.A.Helliwell</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Eigil.Ungstrup</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Gerhard.Haerendel</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Gerald.S.Levy</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Georg.Gustafsson</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Alain.Roux</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Jean-Louis.Henry.Bougeret</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Umran.S.Inan</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Robert.L.Mutel</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Bent.M.Pedersen</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Patrick.Canu</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Warren.L.Martin</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Steven.R.Spangler</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/Gerard.Daigne</PersonID>
                <Role>CoInvestigator</Role>
            </Contact>
            <Contact>
                <PersonID>spase://SMWG/Person/James.M.Weygand</PersonID>
                <Role>MetadataContact</Role>
            </Contact>
            <InformationURL>
                <Name>NSSDC's Master Catalog on the Wide Band Data (WBD) experiment</Name>
                <URL>http://nssdc.gsfc.nasa.gov/nmc/experimentDisplay.do?id=2000-045A-10</URL>
                <Description>Introduction to the WBD experiment on Cluster II Rumba</Description>
            </InformationURL>
            <Association>
                <AssociationID>spase://SMWG/Observatory/Cluster-Rumba</AssociationID>
                <AssociationType>ObservedBy</AssociationType>
            </Association>
            <PriorID>spase://VMO/NumericalData/Cluster2-Rumba/WBD/PrimeParameter/PT0.02S</PriorID>
        </ResourceHeader>
        <AccessInformation>
            <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF/CDAWeb</RepositoryID>
            <Availability>Online</Availability>
            <AccessRights>Open</AccessRights>
    <!--
  <AccessURL>
        <Name>CDAWeb</Name>
        <URL>ftp://cdaweb.gsfc.nasa.gov/pub/istp/cluster/c1/wbd</URL>
        <Description>Prime Parameter Wide Band Data from Cluster II Rumba</Description>
      </AccessURL> 
    -->
            <AccessURL>
                <Name>CDAWeb</Name>
                <URL>http://cdaweb.gsfc.nasa.gov/</URL>
                <ProductKey>C1_WAVEFORM_WBD</ProductKey>
            </AccessURL>
            <Format>CDF</Format>
            <Acknowledgement>NASA; Prof. Donald A. Gurnett</Acknowledgement>
        </AccessInformation>
        <ProcessingLevel>Calibrated</ProcessingLevel>
        <ProviderResourceName>Cluster II Rumba Wide Band Data</ProviderResourceName>
        <ProviderProcessingLevel>Calibrated</ProviderProcessingLevel>
        <ProviderVersion>1</ProviderVersion>
        <InstrumentID>spase://SMWG/Instrument/Cluster-Rumba/WBD</InstrumentID>
        <MeasurementType>MagneticField</MeasurementType>
        <MeasurementType>ElectricField</MeasurementType>
        <MeasurementType>Spectrum</MeasurementType>
        <TemporalDescription>
            <TimeSpan>
                <StartDate>2001-02-04T00:00:00</StartDate>
                <RelativeStopDate>-P3M</RelativeStopDate>
                <Note>Time format in data files is: day, month, year hour, min, seconds. Ex: '01-Jan-1981 00:00:00.000'</Note>
            </TimeSpan>
            <Cadence>PT0.02S</Cadence>
        </TemporalDescription>
        <ObservedRegion>Earth.Magnetosheath</ObservedRegion>
        <ObservedRegion>Earth.Magnetosphere</ObservedRegion>
        <ObservedRegion>Earth.Magnetosphere.Magnetotail</ObservedRegion>
        <ObservedRegion>Earth.Magnetosphere.Main</ObservedRegion>
        <ObservedRegion>Earth.Magnetosphere.Polar</ObservedRegion>
        <ObservedRegion>Earth.Magnetosphere.RadiationBelt</ObservedRegion>
        <ObservedRegion>Earth.NearSurface.AuroralRegion</ObservedRegion>
        <ObservedRegion>Earth.NearSurface.Ionosphere</ObservedRegion>
        <ObservedRegion>Earth.NearSurface.Plasmasphere</ObservedRegion>
        <ObservedRegion>Earth.NearSurface.PolarCap</ObservedRegion>
        <ObservedRegion>Heliosphere.NearEarth</ObservedRegion>
        <Keyword>10 to 20 ms</Keyword>
        <Keyword>magnetosphere</Keyword>
        <Keyword>auroral region</Keyword>
        <Keyword>polar cap</Keyword>
        <Keyword>cusp</Keyword>
        <Keyword>bow shock</Keyword>
        <Keyword>solar wind</Keyword>
        <Keyword>magnetosheath</Keyword>
        <Keyword>cluster</Keyword>
        <Keyword>magnetotail</Keyword>
        <Keyword>lobe</Keyword>
        <Parameter>
            <Name>Universal Time</Name>
            <ParameterKey>Epoch</ParameterKey>
            <Description>Universal Time in data cell: day, month, year hour, min, seconds. Ex: '01-Jan-1981 00:00:00.000'. On-board time is corrected to a precision of order 50 microseconds when compared to UTC. The applied time correction comes from the DWP TCOR time correction files located at the Cluster Active Archive (CAA).</Description>
            <Caveats>Interval centered time tag. Fill value is 31-Dec-999 23:59:59.999.999.999.999</Caveats>
            <Cadence>PT0.02S</Cadence>
            <Units>picoseconds</Units>
            <UnitsConversion>'1.0e-12&gt;s'</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Epoch</AxisLabel>
            </RenderingHints>
            <Support>
                <SupportQuantity>Temporal</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Bandwidth</Name>
            <ParameterKey>Bandwidth</ParameterKey>
            <Description>Cluster II Rumba WBD frequency bandwidth in kHz.</Description>
            <Caveats>WARNING:  19 and 77 kHz Bandwidth modes with 8-bit resolution, and 77 kHz Bandwidth mode with 4-bit resolution (see Resolution variable) are not continuous data modes.  Always check for periodic time jumps for these modes.</Caveats>
            <Cadence>PT0.02S</Cadence>
            <Units>kHz</Units>
            <UnitsConversion>1.0e3&gt;Hz</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Bandwidth</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>80</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Translation</Name>
            <ParameterKey>Translation</ParameterKey>
            <Description>Cluster II Rumba WBD base translation frequency of frequency bandwidth in kHz.</Description>
            <Caveats>Also known as Conversion Frequency.</Caveats>
            <Cadence>PT0.02S</Cadence>
            <Units>kHz</Units>
            <UnitsConversion>1.0e-3&gt;Hz</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Freq.Shift</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>510</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Digital Resolution</Name>
            <ParameterKey>Resolution</ParameterKey>
            <Description>Cluster II Rumba WBD number of bits used when digitizing data.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>bits</Units>
            <UnitsConversion>1.0&gt;bit</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Dig. Res.</AxisLabel>
            </RenderingHints>
            <ValidMin>1</ValidMin>
            <ValidMax>8</ValidMax>
            <FillValue>-128</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Antenna</Name>
            <ParameterKey>Antenna</ParameterKey>
            <Description>Cluster II Rumba WBD antenna used for measurements. 0=Ez, 1=Bx, 2=By, 3=Ey.</Description>
            <Cadence>PT0.02S</Cadence>
            <RenderingHints>
                <AxisLabel>Antenna</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>3</ValidMax>
            <FillValue>-128</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Gain</Name>
            <ParameterKey>Gain</ParameterKey>
            <Description>Cluster II Rumba gain state of WBD instrument. Steps of 5 dB from 0 to 75.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>dB</Units>
            <UnitsConversion>1.0&gt;(dB)</UnitsConversion>
            <RenderingHints>
                <AxisLabel>WBD Gain</AxisLabel>
            </RenderingHints>
            <ValidMin>-1</ValidMin>
            <ValidMax>80</ValidMax>
            <FillValue>-128</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Antenna-B Field Total Angle</Name>
            <ParameterKey>Ant_B_Field_Angle</ParameterKey>
            <Description>Cluster II Rumba WBD Total angle between antenna used for WBD measurement and measured B field direction. Antenna refers to the antenna in use, either E or B.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>degrees</Units>
            <UnitsConversion>1.0&gt;degree</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Ant-B Ang</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>180</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Antenna Xgse Angle</Name>
            <ParameterKey>Ant_Xgse_Angle</ParameterKey>
            <Description>Cluster II Rumba WBD Total angle between the Xgse axis and the antenna direction. Total angle between the Xgse axis and the antenna direction. Antenna refers to the antenna in use, either E or B.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>degrees</Units>
            <UnitsConversion>1.0&gt;degree</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Ant_Xgse</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>180</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Antenna YZgse Angle</Name>
            <ParameterKey>Ant_YZgse_Plane_Angle</ParameterKey>
            <Description>Cluster II Rumba WBD Total angle between Ygse axis and the projection of the antenna direction in the Ygse-Zgse plane. Total angle between Ygse axis and the projection of the antenna direction in the Ygse-Zgse plane, measured counter-clockwise from +Ygse (angle=0 deg) to +Zgse (angle=90 deg), -Ygse (angle=180 deg) and -Zgse (angle=270 deg).  Antenna refers to the antenna in use, either E or B.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>degrees</Units>
            <UnitsConversion>1.0&gt;degree</UnitsConversion>
            <RenderingHints>
                <AxisLabel>Ant_YZgse</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>360</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Offset</Name>
            <ParameterKey>DC_Offset</ParameterKey>
            <Description>Cluster II Rumba WBD DC Offset used when converting from raw digital values to calibrated data. DC Offset values may be used to reverse calibrate the data to the original raw counts and to determine the boundaries of the original transport packets. A description of the procedure may be found in the 'cluster_wbd_calibration.pdf' document (see Global attributes section of this file).  In addition, sample code for reverse calibration may be found in the above mentioned document.</Description>
            <Cadence>PT0.02S</Cadence>
            <RenderingHints>
                <AxisLabel>DC Offset</AxisLabel>
            </RenderingHints>
            <ValidMin>0</ValidMin>
            <ValidMax>255</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD AC Electric Field</Name>
            <ParameterKey>WBD AC Electric Field</ParameterKey>
            <Description>Cluster II Rumba WBD Calibrated AC WBD Electric Field.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>mV/m</Units>
            <UnitsConversion>1.0e-3&gt;V/m</UnitsConversion>
            <RenderingHints>
                <AxisLabel>E-field</AxisLabel>
            </RenderingHints>
            <ValidMin>-50</ValidMin>
            <ValidMax>50</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Field>
                <FieldQuantity>Electric</FieldQuantity>
                <FrequencyRange>
                    <Low>25</Low>
                    <High>577000</High>
                    <Units>Hz</Units>
                </FrequencyRange>
            </Field>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD AC Magnetic Field</Name>
            <ParameterKey>WBD AC Magnetic Field</ParameterKey>
            <Description>Cluster II Rumba WBD Calibrated AC WBD Magnetic Field.</Description>
            <Cadence>PT0.02S</Cadence>
            <Units>nT</Units>
            <UnitsConversion>1.0e-9&gt;T</UnitsConversion>
            <RenderingHints>
                <AxisLabel>B-field</AxisLabel>
            </RenderingHints>
            <ValidMin>-10</ValidMin>
            <ValidMax>10</ValidMax>
            <FillValue>-1.0000e+031</FillValue>
            <Field>
                <FieldQuantity>Magnetic</FieldQuantity>
                <FrequencyRange>
                    <Low>25</Low>
                    <High>577000</High>
                    <Units>Hz</Units>
                </FrequencyRange>
            </Field>
        </Parameter>
        <Parameter>
            <Name>Cluster II Rumba WBD Data Quality</Name>
            <ParameterKey>Data_Quality</ParameterKey>
            <Description>Cluster II Rumba WBD data quality. 1.0&gt;(ordinal 0=OK, 1= Clipped or questionable, 2= Bad data value).</Description>
            <Caveats>Clipped data:  Measurement was equal to raw data value maximum (255) or minimum (0).  This does not necessarily mean the receiver was in saturation, which would be accompanied by non-linear effects.</Caveats>
            <Cadence>PT0.02S</Cadence>
            <RenderingHints>
                <AxisLabel>Data Qual</AxisLabel>
            </RenderingHints>
            <ValidMin>-1</ValidMin>
            <ValidMax>3</ValidMax>
            <FillValue>-128</FillValue>
            <Support>
                <SupportQuantity>Other</SupportQuantity>
            </Support>
        </Parameter>
    </NumericalData>
</Spase>