<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://www.spase-group.org/data/schema/spase-2_2_1.xsd">
    <Version>2.2.1</Version>
    <NumericalData>
        <ResourceID>spase://VWO/NumericalData/Voyager2/PRA/Jupiter/High.PT48S</ResourceID>
        <ResourceHeader>
            <ResourceName>Voyager 2 PRA Highband Receiver Jupiter encounter, 48 sec resolution</ResourceName>
            <ReleaseDate>2012-02-24T17:08:31Z</ReleaseDate>
            <Description>
	Voyager 2 Planetary Radio Astronomy (PRA) Highband receiver daily files 
	during Jupiter Encounter (1979-06-01 to 1979-07-30). Associated with these binary data are a series of quick-look GIF plots created using the binary data. 	The plots are available for both polarization channels.
	
	
	The data set provides 48 second resolution highband radio mean power data
	in units of millibels. The high-band receiver consisted of 128 channels of 
	200 kHz bandwidth each, with center frequencies spaced at 307.2 kHz 
	intervals from 1.2 MHz to 40.4 MHz. The highband receiver was designed 
	especially for the observation of Jovian decametric radio emissions. The 
	PRA radiometer was usually operated routinely in the so-called POLLO sweeping 
	mode, in which all 198 frequency channels of the high- and low-band receivers 
	together were swept in 6 sec, dwelling at each channel for 25 msec. From one 
	step to the next in the channel switching sequence, the antenna polarization 
	sense was reversed, i.e., was changed from RH to LH or vice versa. Thus the 
	time required for making a measurement of both the RH and LH intensity 
	components at both senses of elliptical polarization at a given frequency was 
	12 sec. The data consists of successive averages of 4 pairs of RH and LH 
	intensity measurements, each average spanning an interval of 48 sec.

	The format of these binary data files is as follows:

	file separation variable

	year, month, day information

	millisecond decimal value of the day

	Integer array (128,2) for 128 left and right channels (NOTE 128 channels for Hi-band; 70 channels for Lo-band)

	file separation variable
 
	There is an IDL program that reads these files into an IDL-format save set. See Information URL for a link to this file.
	
                                                          
      The data are calibrated and are given in units of             
      'millibels' which is 1000 times the log of the received power.          
      Zero millbels corresponds to approximately 1.4 x 10^-21 W m^-2          
      Hz^-1, however, this value is never seen in practice. The               
      minimum values detected, which includes receiver internal and           
      spacecraft generated noise, are about 2300 to 2400 millibels,           
      or about 3.5 x 10^-19 W m^-2 Hz^-1; even higher values are seen         
      at the very lowest frequencies.                                         
                                                                              
	  Note:     
      The polarization indicated is the received polarization, not                
      necessarily the emitted polarization. Correct interpretation of         
      the received polarization depends on the antenna plane                  
      orientation relative to the radio source. A good description of         
      this concept can be found in 
      
      Leblanc Y., Aubier M. G., Ortega-Molina A.,
      Lecacheux A., 1987, J.Geophys. Res. 92, 15125 and in 
      
      Wang, L. and Carr, T.D.,
      Recalibration of the Voyager PRA antenna for polarization sense 
      measurement, Astron. Astrophys., 281, 945-954, 1994. and references therein.

          </Description>
            <Acknowledgement>When using delivered data please acknowledge the data provider.
         </Acknowledgement>
            <Contact>
                <PersonID>spase://SMWG/Person/James.W.Warwick</PersonID>
                <Role>PrincipalInvestigator</Role>
            </Contact>
            <InformationURL>
                <Name>PPI/PDS PRA Instrument catalog file PRAINST.CAT</Name>
                <URL>http://ppi.pds.nasa.gov/ditdos/download?id=pds://PPI/VG_1601/CATALOG/PRAINST.CAT</URL>
                <Description>Information about the PRA instrument on the Voyager mission including operational mode descriptions.
         	</Description>
            </InformationURL>
            <InformationURL>
                <Name>Planetary Radio Astronomy (PRA)</Name>
                <URL>http://nssdc.gsfc.nasa.gov/nmc/experimentDisplay.do?id=1977-076A-10</URL>
                <Description>NSSDC Master Catalog description of the Voyager 2 PRA Instrument
         	</Description>
            </InformationURL>
            <InformationURL>
                <Name>IDL program - convertvoyHIband</Name>
                <URL>http://vwo.nasa.gov/utils/Voyager_PRA/convertvoyHIband.txt</URL>
                <Description>An IDL program that will read these Voyager PRA highband binary files and convert to IDL save sets.
         	</Description>
            </InformationURL>
            <PriorID>spase://VWO/NumericalData/Voyager2/PRA/VG2_PRA_High_Jupiter_PT48S</PriorID>
        </ResourceHeader>
        <AccessInformation>
            <RepositoryID>spase://SMWG/Repository/UIowa/RadioPlasmaWaveGroup</RepositoryID>
            <Availability>Online</Availability>
            <AccessRights>Open</AccessRights>
            <AccessURL>
                <Name>Access to Voyager 1 and 2 PRA Highband 48 second binary data files</Name>
                <URL>http://www-pw.physics.uiowa.edu/voyager/data/pra/</URL>
                <Description>Within this directory list are the binary data files for Voyager 1 and 2 PRA highband.
            </Description>
                <Language>en</Language>
            </AccessURL>
            <Format>Binary</Format>
            <Encoding>None</Encoding>
            <Acknowledgement>When using delivered data please acknowledge the data provider.</Acknowledgement>
        </AccessInformation>
        <InstrumentID>spase://SMWG/Instrument/Voyager2/PRA</InstrumentID>
        <MeasurementType>Waves.Passive</MeasurementType>
        <MeasurementType>Spectrum</MeasurementType>
        <MeasurementType>ElectricField</MeasurementType>
        <MeasurementType>MagneticField</MeasurementType>
        <TemporalDescription>
            <TimeSpan>
                <StartDate>1979-06-01T00:00:34Z</StartDate>
                <StopDate>1979-07-30T23:59:59Z</StopDate>
            </TimeSpan>
            <Cadence>PT48S</Cadence>
        </TemporalDescription>
        <SpectralRange>RadioFrequency</SpectralRange>
        <ObservedRegion>Jupiter</ObservedRegion>
        <ObservedRegion>Heliosphere.Outer</ObservedRegion>
      <!-- Keywords pertaining to the data presentation -->
        <Keyword>Dynamic Spectrogram</Keyword>
        <Keyword>Spectrogram</Keyword>
      <!-- Keywords pertaining to the physical phenomena appearing in spectrograms -->
        <Keyword>Jupiter</Keyword>
        <Keyword>Decametric Radio Emission</Keyword>
        <Keyword>DAM</Keyword>
        <Parameter>
            <Name>Date</Name>
            <Description>Year, month, and day in the format YYMMDD</Description>
            <Support>
                <SupportQuantity>Temporal</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Millisecond</Name>
            <Description>Milliseconds of day</Description>
            <Units>ms</Units>
            <Support>
                <SupportQuantity>Temporal</SupportQuantity>
            </Support>
        </Parameter>
        <Parameter>
            <Name>Spectral Power</Name>
            <Description>Electric field power spectral density,
	 an average of 8 sweeps of the PRA highband receiver of 128 frequency channels each. 
	 </Description>
            <Units>millibels</Units>
            <Wave>
                <WaveType>PlasmaWaves</WaveType>
                <WaveQuantity>ACElectricField</WaveQuantity>
                <FrequencyRange>
                    <SpectralRange>RadioFrequency</SpectralRange>
                    <Low>1.2</Low>
                    <High>40.4</High>
                    <Units>MHz</Units>
                </FrequencyRange>
            </Wave>
        </Parameter>
        <Extension/>
    </NumericalData>
</Spase>